Max CN565S3 SuperSider Coil Siding Nailer

Siding Coil Nailer up to 2-1/2″

The MAX CN565S3 SuperSider is a top of the line professional grade pneumatic siding nailer. The CN565S3 is used for sheathing, subflooring, roof decking, exterior deck, siding, fencing, exterior trim, furring, and strapping jobs. A no mar contact tip is included with this tool.

Standard Equipment:

• CN565S3 Coil Siding Nailer
• Wrench
• Carrying Case

Specifications:

• Flat Wire Welded Nails: 1-1/2″x.083″ to 2-1/2″x.098″
• Flat Plastic Sheet Collated Nails: 1-1/4″ x .083″ to 2-1/2″ x .098″
• Capacity: 400
• Air Inlet Type: 1/4″ NPT
• Operating Pressure: 70 – 120 psi
• Air Consumption: 0.05 cu-ft @ 100 psi
• Height: 11-7/8″
• Length: 10-7/8″
• Width: 5.0″
• Weight: 5.2 lbs

Features:

• Slim contact arm guides the nail to reduce bending and the no mar contact tip reduces the appearance of driver marks around the nail head and on materials
• The patented, self-cleaning maintenance free end cap filter captures foreign substances before they can enter the tool and automatically ejects them when the air hose is disconnected
• Anti-double fire trigger prevents multiple nails from being fired in one shot. To move between bump fire and single fire mode no adjustment to the tool is necessary
• An easy twist air deflector cap rotates 360 degrees to divert exhaust air away from the user
• The depth adjustment dial allows operators to effortlessly drive nails into hard materials, and also control depth of drive when fastening soft materials, for a consistently polished finish
• Rapidly load a coil of nails with the easy load magazine design
• A heavy duty rafter hook gives the operator the convenience of hanging tool on rafters as they move around the jobsite

Comments:

Applications include fastening asphalt and fiberglass shingles, siding installation, fastening lath wire on plywood, wooden box assembly.